Results 1 to 5 of 5

Thread: A warning for rising rate FMU users

  1. #1
    Inactive Member Hondata's Avatar
    Join Date
    July 22nd, 2001
    Posts
    66
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    We have just completed a test on a stock 2000 Civic SI fuel pump. At 35 psi, it flowed enough fuel for 400 crank HP. If you increase your fuel pressure to 75 psi on this pump, it can only flow enough fuel for 200 crank HP. This pump has an internal relief valve that opens at 75 PSI to dump excess pressure back into the tank.

    So what you say - I'll put in a bigger pump. Some of the Walbro pumps have the pressure relief valve set at 100 psi, and the flow still reduces as the pressure rises.

    The specific warning is that if you use rising rate FMUs, you need to know where the bleed valve opens on your pump, and that the fuel pump can supply the volume of fuel at that pressure for the horsepower you want. Not paying attention to this will result in a leaning out and probably a blown engine.

    The specific test results are here: http://Hondata.com/techfuelpump.html

    Use the information to make intelligent decisions about managing the fuelling for your engine.


    ------------------
    http"//www.hondata.co
    m

  2. #2
    Inactive Member austrian type-R's Avatar
    Join Date
    August 17th, 2000
    Posts
    604
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    thanks!

    Did?nt know that

  3. #3
    Inactive Member 00ITR006's Avatar
    Join Date
    July 15th, 2000
    Posts
    355
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    whats the price of your stage 2 +boost, and you stage 4+ boost, i'm seriously thinking of getting rid of all this JR Crap, vafc, and getting your unit. Email me some numbers and some reasons why i should switch my setup, also getting rid of the supercharger soon, and getting a drag III, Do you know any tuners in the Charlotte, NC or any other NC area for that matter?

  4. #4
    Inactive Member falconGSR's Avatar
    Join Date
    October 19th, 2000
    Posts
    324
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    hey mr hondata (doug is your name?) why dont you put together a package deal for people with JRSCs? Not necessarily a group buy, but a package that has everything including a conservative timing and fuel map?

    We could send you an OBD1 ecu and you send it back with a nice lil kit to install.

    Just a thought.

    Joe

  5. #5
    Inactive Member zip's Avatar
    Join Date
    February 4th, 1999
    Posts
    1,160
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by falconGSR:
    a package that has everything including a conservative timing and fuel map?

    <HR></BLOCKQUOTE>

    That's what Doug was trying to accomplish at DSR in Mountain View, California last week. He was testing a civic hybrid JRSC w/ a B18C5.

    ------------------
    Mods

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •